CPS Compatible Metal Bond Diamond Tooling - Double Round

CPS Compatible Metal Bond Diamond Tooling - Double Round is popular in finer grit meshes before applying a thin coating, stain or during the polishing process.

The Double Button Diamond Grinding Trapezoid Plate is a proprietary matrix of high quality abrasive diamonds embedded evenly throughout both segments. The circular segments are designed for aggressive scratching and exceptional durability with strong grinding capabilities. The metal segments are designed for wet or dry applications. The manufacturing process ensures even distribution of abrasives throughout the tool adding to the longevity and performance of the tooling.

Segment Configuration: Double Round Segments.

Segment Size: Φ25x12.5mm.

Grits Available: 6#, 16/20#, 25#, 30#, 50#, 80#, 100#, 120#, 150#, 200# and other grits upon customer's request

Color: Available in gold, black, red, blue, green, orange, yellow and purple

Options Of Bond: Extra Hard, Hard, Medium, Soft and Extra Soft

Suggested Applications: Concrete Floors with Soft, Medium, hard and very Hard hardness

Grinding Machines: Fits bolt-on floor grinding machines, including:

                                  Diamatic - BGS-435 / 555 / 735 / 780

                                  SASE - PDG 5000 / 5000P / 6000 / 8000 / 8000P / 9500 / R8

                                  CPS - G170 / 210 / 250 / 290 / 320D

                                  Innovatech / Bartell - Predator 1800 / 2400 / 32D / 32NDX

                                  Klindex - Expander

                                  And any magnetic plates or adapters can fit it on

Grinding Method: Wet or dry 

Uses:

The Double Button Diamond Grinding Trapezoid Plate is an excellent diamond tool generally used in the first few steps of the concrete grinding and polishing process and as an ideal mechanical preparation tool on concrete for cementitious overlays and industrial coatings. Depending on the surface coating, the Double Button Diamond Grinding Trapezoid Plate can be used as a coatings removal tool up to 1 mm thick while not gouging the surface. The rugged design of the tool makes it ideal for heavy grinding, cutting and leveling especially when aggressive grinding is necessary.

Application:

The Double Button Diamond Grinding Trapezoid Plate is intended to be used on most concrete surfaces. It is recommended to use a hard bond matrix when the tooling is being used on medium to soft surfaces while the soft bond matrix is ideal on hard to very hard surfaces. The use of water in the grinding process will typically increase the life of the tooling as well as provide a more aggressive grind on the surface. It is highly recommended to use a vacuum system when dry grinding as this tooling will create large amounts of dust. 300-600 RPM's is recommended. Do not exceed 1,000 RPM's.

Coverage:

Coverage can vary from surface to surface depending on roughness, porosity and density of the medium being applied. Application technique can also vary the coverage. On flat, dense surfaces, the coverage should generally range from 5000 to 10000 square feet per set. Wet grinding will usually extend the life of the tooling.

We offer these tools in wide variety of high quality bonds and grits

Grit 6#,16/20# diamond grinding shoes are usually the first step of metal bond grinding for removing old rough surfaces. The big diamond particles give you deep cut and powerful removal, The use can significantly open the floors and expose the new substrate of concrete, so you can easily step to next floor prep and resurfacing.This grit is also good for thinner coating removal such as urethane, acrylic, epoxy, and so on.

Grit 30/40# are commonly used for concrete floor grinding. It produces even and obvious scratch pattern and easily and quickly open the old surfaces.

Grit 50/60/70/80# is produces medium scratches.

Grit 100/120/150# diamond grinding shoes are usually the last step of metal bond grinding for concrete floors finest preparation. 

* Extra Hard, Hard, Mediium, Soft, Soft and Extra Soft printed on the discs stand for bonds of the segments. please choose the right discs for the concrete

Extra Hard Bond (Gold) for very soft Concrete floor:

Hard Bond (Black) for soft Concrete floor:

Medium Bond (Red) for middle hard Concrete floor:

Soft Bond (Blue) for hard Concrete floor:

Extra Soft Bond (Green) for very hard Concrete floor:

Packing Detaisl:

3 pcs or 9 pcs in one box.

Shipment and Payment

Free Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a full refund. (Shipping cost not refunded)

Payment Safety: T/T Payment and PayPal

OEM services: OEM/ODM service is available, such as logo engraving(free), painting color(free), and etc.

Your Privacy: We will never share your information with anyone.